Skirting boards are in trend nowadays. Do you know about skirting boards? If you also want to remodel your house’s look try these skirting boards. The addition of both architraves and skirting boards will illuminate your house. It brings a new innovative look. For proper decoration, match the colour of skirting with paintings in the room.
In the market, there are different skirting boards available. Check them out and select the best one among them. The most commonly used skirting boards are softwood and hardwood. The MDF variant skirting boards are available at a low cost as compared to others.
How to choose the skirting boards Perth?
The selection of the skirting board is highly precise. Do it in the right way. Do not mix the internal corners skirting board box with the external ones.
If you want to decorate your home in a traditional style, use the MDF skirting. The MDF skirting available are square MDF skirting, 330 MDF skirting, and many more. Choose the most classical one to have a great and cool look.
How to Stay Safe While Fixing Skirting board?
Suppose you are going to install a skirting board without taking precautionary measures. It will be a great risk for you. Always read a useful guide before starting work.
- In the cutting of the skirting board, a mitre box is used. Fix the mitre box to a wooden table with the help of clamps.
- Keep your hands free while cutting the skirting board. Hold it firmly so that it cut on the exact position.
- Before drilling, detect the hidden water pipes and electric wires with the help of a detector. It will avoid you from any biggest problem.
- Avoid using drills just below the switches and electric socket.
- For your safety, wear knee pads, gloves, and safety goggles.
How to Fit Skirting boards?
Whether you are fixing it for the first time or not be aware of the safety rules. The installation of the skirting board is quite easy and simple. The following steps will help you to understand the installation procedure of the skirting board.
Step1: Start from the inner left corner of the room and then move in an anti-clockwise direction. Fit the skirting by pressing it firmly.
Step2: Measure the skirting board with the help of a tape measure and then mark it with a pencil. Cut the skirting 20% extra so that it adjusted perfectly.
Step3: Use the mitre box and panel saw to cut the boards. Mark the side of the skirting board you are going to display.
Step4: With the help of sandpaper smooth the edges of the skirting board. Give them a perfectly smooth and even shape.
Step5: If there are gaps left after the fixation of skirting boards, fill them with gap filler. The gap filler and compound powders are available that fill the spaces between walls and skirting.
Step6: Use a sealant to adhere to the surface firmly. The sealant seals it and does not allow the air to move through it.
